Struers LaboPol-20 - Safety Circuit Categories;Performance Level

Power supply Voltage/frequency 200-240 V/50-60 Hz
Power inlet 1-phase (N+L1+PE) or 2-
phase (L1+L2+PE)
The electrical installation must
comply with Installation
Category II
Power, nominal load 600 W
Power, idle 11 W
Current, nominal load 2.7 A
Current, maximum load 6.3 A
Current, largest load 2.6 A
Safety Circuit
Categories/Performance
Level
Emergency stop PL c, Category 1
Stop category 0
Residual Current Circuit
Breaker (RCCB)
Type A, 30 mA (or better) is
recommended
Water supply Pressure, tap water 1-9.9 bar (14.5-143 psi)
Water inlet Diameter: ½" or ¾"
Water outlet Diameter: 32 mm (1¼")
Noise level A-weighted sound emission
pressure level at
workstations
LpA = 63 dB(A) (measured
value). 4 dB
Vibration level Declared vibration emission Total vibration exposure to
upper parts of the body does
not exceed 2.5 m/s2.
Dimensions and weight Width 40 cm (15.7")
Depth 67.3 cm (26.5")
Height 28 cm (8.7")
Weight 22 kg (49 lbs)
11.2 Safety Circuit Categories/Performance Level
Safety Circuit
Categories/Performance
Level
Emergency stop PLc, Category 1
Stop category0
46 LaboPol-20
11 Technical data