6 LaboUI 20
6.1 Installation 20
6.1.1 Unpack the machine 20
6.1.2 Check the packing list 20
6.1.3 Installation - LaboUI 21
6.2 Operate the device 21
6.2.1 Control panel functions 21
6.2.2 Water tap 22
6.2.3 The spin function 23
6.2.4 The splash guard 23
6.2.5 Manual preparation 23
6.2.6 Starting and stopping the machine 24
7 LaboForce-50 25
7.1 Installation 26
7.1.1 Unpack the machine 26
7.1.2 Check the packing list 26
7.1.3 Installation - LaboForce-50 27
7.1.4 Adjusting the specimen mover 28
7.2 Operate the device 30
7.2.1 Control panel functions 30
7.2.2 Water tap 31
7.2.3 The spin function 32
7.2.4 The splash guard 32
7.2.5 Inserting a specimen 32
7.2.6 Adjusting the force 33
7.2.7 Manual preparation 33
7.2.8 Starting and stopping the machine 34
7.2.9 Removing the specimens 36
7.2.10 Changing the specimen mover plate 36
8 LaboDoser-10 36
8.1 Unpack the machine 37
8.2 Check the packing list 38
8.3 Installation 38
8.4 Operating LaboDoser-10 39
8.5 Changing lubricant/suspension 39
9 Maintenance and service 40
9.1 General cleaning 40
9.2 Daily 40
9.3 Weekly 40
4 LaboPol-20
To Next Page
Loading...
