• 3/8” hex driver
• 7/16” socket
PPrroocceedduurree::
1. Using a 3/8” hex driver, attach the patient helper mounting bracket with the four supplied screws.
NNoottee -- Make sure that the armrest pin faces upward.
2. On the floor, place the patient helper lifting pole, patient helper cap, and patient helper trapeze hanger together.
3. Using a 7/16” socket, secure the patient helper lifting pole, patient helper cap, and trapeze hanger together with the
supplied bolt.
4. With another person, lift and insert the patient helper assembly into the patient helper mounting bracket.
5. Verify proper operation of the product before you return it to service.
5900-009-002 Rev A.0 35 EN
To Next Page
Loading...
Need help?
General
