Stryker T2 - T2 Recon Specific Instruments

Ordering Information – Instruments
1806-3100
1806-3101
1806-3005
1806-3010
1806-3015
1806-3026S
1806-3030S
1806-3031S
1806-3035
1806-3040
1806-3041
1806-3045
1806-3050
1806-3055
1806-3057
1806-3060
1806-3070
1806-3090
1806-0294
1806-4290S
1806-4260S
1806-4270S
1806-8018S
Target Device
Knob for Target Device
Nail Holding Screw, Recon
One Step Conical Reamer Ø13, Recon
One Step Conical Reamer Ø15, Recon
Solid Stepdrill for Lag Screw*
Recon K-Wire, Recon*
K-Wire, Recon, CoCr
Lag Screw Gauge, Recon
K-Wire Sleeve, Recon
Drill Sleeve for Solid Stepdrill
Tissue Protection Sleeve, Recon
Screwdriver Shaft, Recon
Multihole Trocar
Protection Sleeve, Antegrade
Screwdriver, Recon
K-Wire Inserter
Screwdriver Shaft, AO, Ball Tip
Screwdriver Shaft, Selfholding, 3.5 × 85mm
Drill Ø4.2 × 230mm, AO*
Drill Ø4.2 × 340mm, AO*
Drill Ø4.2 × 180mm, AO*
Drill Ø4.2 × 250mm, oblique AO*
* For non-sterile, leave “S” off the REF number
when ordering.
 REF Description
T2ReconInstruments
38