Stryker T2 - Technical Specifications

Introduction
NailDiameter 9, 11, 13 and 15mm
(Left and Right)
Sizes 280−480mm,
in 20mm increments
Note:
• Proximal diameter is 13mm for
the 9 and 11mm Nails and 15mm
for the 13 and 15mm Nails.
• Check with your local
representative regarding
availability of nail sizes.
5.0mm Fully Threaded
Locking Screws
L = 25–120mm
6.5mm Cannulated
Lag Screws
L = 65–130mm
Antegrade Set Screw
End Caps
Standard +5mm +10mm +15mm
0mm
Antecurvature
radius 2.0M
40mm
20mm
15mm
0mm
4° Medial Lateral bend
44mm
70°
125°Nail angle
0mm
26mm
10.5mm
Technical Specifi cations
Recon Set Screw
17.0mm
Note:
Screw length is measured
from top of head to tip.
6