Studer Innotec SA
RCC-02/-03
User manual V4.4.0 89
Inverter power level 3 activate (AUX 1)
Inverter power level to deactivate (AUX 1)
Time delay to deactivate (AUX 1)
Contact active according to battery temperature
(AUX 1) With BSP or BTS
Contact activated with the temperature of
battery (AUX 1)
Contact activated over (AUX 1)
Contact deactivated below (AUX 1)
Contact active according to SOC (AUX 1) Only
with BSP
Contact activated with the SOC 1 of battery
(AUX 1)
Contact activated below SOC 1 (AUX 1)
Contact activated with the SOC 2 of battery
(AUX 1)
Contact activated below SOC 2 (AUX 1)
Contact activated with the SOC 3 of battery
(AUX 1)
Contact activated below SOC 3 (AUX 1)
Contact deactivated over SOC (AUX 1)
Delay to deactivate (AUX 1)
Deactivate if battery in floating phase (AUX
1)
Security, maximum time of contact (AUX 1)
Maximum time of operation of contact (AUX 1)
Reset all settings (AUX 1)
Combination of the events for the auxiliary
contact (AUX 2)
Temporal restrictions (AUX 2)