Need help?Do you have a question about the Studer Revox B226 and is the answer not in the manual?
Guidance on protecting the REVOX B226 from heat, moisture, and ensuring proper ventilation.
Details on warranty card location, regional differences, and conditions for voiding the warranty.
Explanation of the various fields [A]-[G] on the REVOX B226 display panel.
Detailed description of the function of each control element from [1] to [18] on the device's front panel.
Explanation of the REVOX B226 display panel fields [A]-[G].
Detailed description of the function of control elements [19] to [23] on the device's front panel.
Instructions for removing the shipping brace from the player mechanism before operation.
Guidance on connecting the REVOX B226 to amplifiers via fixed or variable outputs.
Procedure for checking and adjusting the mains voltage selector and fuse rating.
Steps for powering on the REVOX B226, including standby indicator behavior.
Procedure for inserting a CD and initiating playback with the PLAY/NEXT button.
How to adjust the volume for headphones and variable output using the player's controls.
Technical details and information about the 'groove' and data encoding on compact discs.
Explanation of disc structure, tracks, indices, DISC TIME, and TRACK TIME.
Precautions for handling CDs, including sensitivity to scratches and cleaning methods.
How to play a selection (track) by pressing the PLAY/NEXT button.
Methods for directly accessing a desired selection (track) using numeric keys.
How to locate and play specific index points within a track on a CD.
Using the search keys [19] and [21] to move playback backward or forward.
Interruption of playback using the PAUSE [3] and STOP [16] keys.
Activating AUTOSTOP [18] for automatic stopping and LOOP [15] for continuous playback.
Changing the time display modes (DISC TIME, TRACK TIME, etc.) using the DISPLAY [17] button.
Using the LOCATE [23] function and connecting headphones via the PHONES [22] socket.
Activating and deactivating programming mode using the PROGRAM [8] key.
Using PROGRAM STEP +/- [11] and CURSOR [10] for program navigation and editing.
Using TRACK/TIME [12], MARK [13], and STORE [14] for setting and saving program steps.
Step-by-step example of reprogramming the sequence of selections (tracks) on a CD.
Detailed example demonstrating how to program a specific sequence of tracks on a CD.
Example showing how to program a specific time interval for playback on the CD player.
Completing the programming of a time interval by setting the end time.
Example illustrating how to set start and stop marks for playback using the MARK [13] function.
Guide on how to edit previously programmed steps using program navigation and input keys.
Methods for erasing a programmed sequence from the CD player's memory.
Instructions for programming the LOOP function for repetitive playback of a CD or program.
How to insert a PAUSE command into a program sequence, pausing playback at a specific point.
How to program a POWER OFF command to automatically switch the unit to standby.
Procedure for retrieving and executing a previously stored program sequence.
Instructions for operating the REVOX B226 using the B201 CD and B205 infrared remote controls.
Information on logically linking the B226 with the REVOX B203 TIMER CONTROLLER for system operation.
Details on the digital outputs [1] and [2] for music and subcode data transmission.
Procedure for setting the line voltage selector on the REVOX B226.
Instructions for checking and replacing the power fuse, including fuse rating details.
Detailed technical data for audio output, scanning system, and player mechanism.
Information on the multifunctional LC display, programming facilities, and general specifications.
Details on power requirements, fuse, consumption, dimensions, and weight.
To Next Page
General
