EN/07.2013/58/37
3.4.7. Counters menu
By pressing the SET key from COUNTERS MENU you can screen the hours of activity of four parameters as below.
VE ON: xxxxx H
VC ON: xxxxx H
CP ON: xxxxx H
FC ON: xxxxx H
The parameters visualized are:
• VE ON: hours of evaporator fan activity
• VC ON: hours of condenser fan activity
• CP ON: hours of compressor activity
• FC ON: hours of freecooling activity
Press the ESC key to go back the previous menu.
3.4.8. Alarm history menu
By pressing the SET key from ALARM MENU you can enter into ALARM HISTORY MENU, where there are all the
information about the last 50 happened alarms.
The last 50 happened alarms are stored and displayed in this menu accessible by the user.
For each alarm we have 2 pages.
First page:
HISTORY ALARM xx/yy
dd/mm/yyyy hh:mm 1/2
DESCRIPTION OF ALARM
DESCRIPTION OF ALARM
Second page:
HISTORY ALARM xx/yy
dd/mm/yyyy hh:mm 2/2
TAE=XX.X TI=XX.X
TC=XX.X TE=XX.X
In the screen the following information are indicated :
• xx/yy: “xx” is a progress number while “yy” is the total number of alarms happened
• dd/mm/yyyy: date when the alarm is happened
• hh:mm: time when the alarm is happened
• DESCRIPTION OF ALARM: which type of alarm is happened as described in the Alarm chapter.
• TAE, TI, TC/PC, TE image of temperatures when alarm occurred.
By pressing the UP/DOWN ARROW keys you can screen one at a time the happened alarms and their description. To
come back the previous menu, press the ESC key.
To Next Page
Loading...
