Need help?Do you have a question about the Stulz E2 Series and is the answer not in the manual?
General| Series | E2 Series |
|---|---|
| Manufacturer | Stulz |
| Input Voltage | 24 V AC/DC |
| Protection Class | IP20 |
| Humidity Range | 5 to 95 % RH, non-condensing |
| Communication Protocol | Modbus RTU, BACnet MS/TP |
| Display | LCD with backlight |
| Mounting | DIN rail |
| Type | Controller |
Introduction to the STULZ E2 Series Controller and its manufacturer.
Instructions for understanding safety information within the manual.
Explanation of warning and caution symbols and statements used in the manual.
Overview of the STULZ E2 Series Controller's capabilities and design.
Lists key features of the STULZ E2 Series Controller.
Details the different types of user interface terminals available.
Describes the different controller models and their I/O modules.
Explains how to navigate through the controller's display menus.
Details password protection and authorization levels for accessing menus.
Step-by-step guide for initial start-up of the A/C system.
Instructions for adjusting temperature and humidity setpoints.
How to save and restore controller setpoint parameters.
Overview of alarm conditions and their handling.
Describes the controller's role in operating the A/C system.
Explains the types and functions of temperature and humidity sensors.
Details how control signals are processed by the controller.
Describes the methods for controlling temperature and humidity.
Details various operating modes like Cooling, Heating, etc.
Explains how the controller manages airflow and fan speed.
Discusses communication methods for the controller.
How to control the unit remotely using an On/Off switch.
How to set up an operating schedule using the weekly timer.
Details the optional dual power transfer switching feature.
How the controller manages tandem compressor staging for efficiency.
Information on controlling multiple units as shadow units.
Describes accessing the main menu and its available options.
Overview of the Information menu for viewing system status.
Explains how to view and manage the alarm log.
Access to setpoints, alarm setpoints, clock, and version information.
Access to advanced settings, calibration, and diagnostics.
Displays key operating parameters for economizer mode.
Screens for setting up and testing economizer operation.
How to enable and configure economizer operation.
Details setting up and managing work groups of multiple A/C units.
Step-by-step guide for configuring A/C units into a work group.
Information on connecting the controller to a Building Management System.
Recommendations for routine maintenance of the controller.
Guide for diagnosing and resolving controller problems.
General procedures for unit repair and component replacement.
Explains the meaning of signal LEDs for diagnostics.
Details the importance and process of factory start-up and warranty inspection.
Information on how to contact STULZ Technical Support.
Procedures for obtaining warranty replacement parts.
Guidance on purchasing spare and replacement parts.
To Next Page
