Stulz E2 Series - Group Information Menu Screens

STULZ E
2
SERIES CONTROLLER FOR PERIMETER SYSTEMS OPERATION MANUAL
26
Press ( ) or ( ) Key
Group T/H Sensors
Avg 000.0 °F 000.0 %
Min 000.0 °F 000.0 %
Max 000.0 °F 000.0 %
Min Temp 0 Min Hum 0
Max Temp 0 Max Hum 0
Net T/H Sensors
00.0°F
00.0%rh
T/H Sensor Value Local
Unit 0 of 0 Lead: 1
Press ( ) or ( ) Key
Press ( ) or ( ) Key
Group Alarm Setup
1-8: 000 9-16: 000
17-24: 000 25-32: 000
33-40: 000 41-48: 000
49-56: 000
Press ( ) or ( ) Key
Group
All Units Off
Avg 43.6 miwg
Min 40.4 miwg
Max 45.5 miwg
Min Static Unit 2
Max Static Unit 7
Press ( ) or ( ) Key
Group Sensor Status
Unit 1 13 Lead Unit 2
Unit1 13 Unit5 0
Unit2 0 Unit6 0
Unit3 0 Unit7 0
Unit4 0 Unit8 0
Network
Underfl oor Static Pr
43.6 miwg
All units off
SP Sensor Value Lead
Unit 1 of 3 Lead:2
Press ( ) or ( ) Key
5.2.22 Group Information Menu Screens
The Group Information menu screens only appear if the controller is set up to
operate multiple A/C unit work group. See Section 7.2.6 for a detailed description
of these screens.