Need help?Do you have a question about the Stulz Ultra Series and is the answer not in the manual?
General| Humidity Range | 5 % to 95 % RH, non-condensing |
|---|---|
| Enclosure Rating | IP20 |
| Input Voltage | 24 V AC/DC |
| Operating Temperature | 0 °C to +50 °C |
| Communication Protocol | Modbus RTU, BACnet MS/TP |
Covers safety summary, warnings, and cautions for user protection and equipment.
Highlights key features like BMS Interface, Field Configurable, and Password Protection.
Procedure for inspecting the controller upon delivery.
Instructions for making field-wiring connections for power and control.
Explains the controller's function in managing humidity output.
Details the proportional and integral control logic for humidification.
Covers password protection for menus and setting passwords.
Describes alarm activation, acknowledgement, and types.
Provides a log of all system alarms with timestamps.
Lists and describes various alarm messages and conditions.
Allows adjustment of humidity, dew point, and group set points.
Configuration of trip points for various alarms.
Detailed setup of humidifier settings and parameters.
Configuring custom alarm inputs and outputs.
Defines relationships between sensor input and display values.
Sets unit type, control mode, and operating modes.
Saving settings, passwords, and initializing defaults.
Using the controller to diagnose and resolve system issues.
Signed values for HTTP, SNMP, Modbus registers, and BACnet analog values.
Unsigned values for HTTP, SNMP, Modbus registers, and BACnet analog values.
Boolean values for HTTP, SNMP, Modbus coils, and BACnet binary values.
To Next Page
