Stulz Ultra Series User Manual

STULZ Ultra-Series Humidifier Controller
(August, 2013) 29
Time: 16:41
Date: 10/26/2013
Day: Thursday
Clock
VERSION
Set
Carel S.p.A.
EUltra Code:
Ver.:1.4B01 01/08/13
Carel Code:
Bios: 5.00 19/09/01
Boot: 4.00 19/09/01
pCO type: pCO3 Large
Total flash: 2048KB
RAM: 1024KB
Built-In Type:
Display Type: 10
Main Cycle:
60.1 cycle/s 16ms
Control
SERVICE
Factory
5.4.3.1 Set Clock
The Set Clock screen allows the setting and/or adjusting
the current time (in 24 hour format), date and day.
Version Screen 5.4.4
Enter the Version menu to view the details of the version
of the installed software. Two Version screens are
provided for information only. They show controller
hardware and software details that are useful to STULZ
Product Support if technical assistance is needed.
5.4.4.1 Version Info Screen 1
5.4.4.2 Version Info Screen 2
5.5 Service Menu
The Service screens allow the user to enter cut-in and cut-
out values, calibrate control sensor(s), save and restore
parameters and view the alarm history log. The Service
menu may be entered via the password screen (requires
level 2 password).
Set Clock
Control Two Version
InformationTwo Version
InformationTwo Version
Main Menu Version

Stulz Ultra Series Specifications

General

Brand	Stulz
Model	Ultra Series
Category	Controller
Language	English