EN/07.2013/58/88
6.7. WEB Monitoring
Using the WIB1000 it’s possible an HTTP monitoring.
Following the relative data point.
Window 2.a (INFO->value)
There will be shown:
Internal relative humidity (IRH)
Pressure of condenser (PC)
External relative humidity (ERH)
Temperature of evaporator (TE)
Temperature of condenser (TC)
Internal temperature (TI)
External temperature (TAE)
Delivery air temperature (TM)
Delivery air temperature of comfort unit 1 (TM1) - Custom 13
Delivery air temperature of comfort unit 2 (TM2) - Custom 13
Internal temperature 1 (TI1) - Custom 9
Internal temperature 2 (TI2) - Custom 9
FREECOOLING (%)
HUMIDIFIER (%)
FAN DC1 (%)
FAN DC2 (%)
FAN DC3 (%)
FAN AC (%)
(S001) Cooling set point
(S002) Second cooling set point
(S003) Heating set point
(S004) Second heater set point
(S005) Humidity set point
State of the machine
Window 2.b (INFO->IO-rawdata)
There will be shown:
DIG IN - A1
DIG IN - A2
DIG IN - A3
DIG IN - A4
DIG IN - A5
DIG IN - A6
DIG IN - A7
DIG IN - A8
DIG IN - A9
DIG IN - A10
DIG IN - A11
DIG IN - A12
DIG IN - A13
DIG – OUT R1
DIG – OUT R2
DIG – OUT R3
To Next Page
Loading...
