26
Fig. 28
Fig. 29
Fig. 30
LCD Liquid Crystal Display
1. DISPLAY Indicates CURRENT room temperature.
2. °F or °C Indicates degrees Fahrenheit or Celsius.
3. FLAME Indicates bumer/valve in operation.
4. ROOM Indicates remote is in THERMO operation.
5. TEMP Appears during manual operation.
6. SET Appears during time the of setting the desired
temperature in the thermo operation.
SETTING°F/°C SCALE
The factory setting for temperature is °F. To change
this setting to°C .
First
Press the ON key and the OFF key on the transmitter
at the same time this will change from°F to °C. Follow
this same procedure to change from°C back to°F.
MANUAL FUNCTION
To operate the system in the manual “MODE” do
the following.
ON OPERATION
Press the ON key and the appliance ame will
come on.
During this time the LCD screen will show
ON (Fig. 27).
After 3 seconds the LCD screen will default to
display room temperature and the word TEMP
will show (Fig. 28). (Flame icon will appear on
LCD screen in manual on mode).
OFF OPERATION
Press the OFF key and the appliance ame will
shut off.
During this time the LCD screen will show OF
(Fig. 29). After 3 seconds the LCD screen
will default to display room temperature and
the wood TEMP will show (Fig. 30).
Fig. 26
Fig. 27
Fig. 25
To Next Page
Loading...
