Subaru WRX 2021 - Ignition Switch

(144,1)
北米Model "A1760BE-A" EDITED: 2020/ 10/ 1
Ignition switch
S03AA
Conventional type ignition switch
Push-button ignition switch
1) Operation indicator
2) Push-button ignition switch
The design of the push-button ignition
switch may be slightly different depending
on the models.
WARNING
. Before leaving the vehicle, ob-
serve the following instructions
for safety.
– Remove the key from the igni-
tion switch (models with con-
ventional type ignition
switch).
– Carry out the access key fob
(models with push-button
ignition switch).
– Never allow an unattended
child to remain in the vehicle.
Failure to observe these instruc-
tions could result in injury to a
child or others. Children could
operate the power windows, the
moonroof or other controls, or
even make the vehicle move.
. Never turn the ignition switch to
the “LOCK”/“OFF” position while
driving or being towed. Doing so
will lock the steering wheel, pre-
venting steering control. In addi-
tion, when the engine stops, it
takes a much greater effort than
usual to steer.
CAUTION
. To prevent the vehicle battery
from discharging, keep the igni-
tion switch in the “LOCK”/“OFF”
position when the engine is not
running.
. Do not use electrical accessories
for a long time with the ignition
switch in the “ON” or “ACC”
position. Doing so can cause the
battery to go dead.
Instruments and controls/Ignition switch
3-4