北米Model "A1760BE-A" EDITED: 2020/ 10/ 1
gether with the brightness level of the
instrument panel. To adjust the display’s
contrast, refer to “Contrast setting” F3-56.
NOTE
The brightness setting is not canceled
even when the ignition switch is turned
to the “LOCK”/“OFF” position.
& Automatic dimming function
S03AJ02
If you turn on the parking lights, the
illumination brightness of the combination
meter, the climate control panel or other
functions will automatically darken.
NOTE
When you turn the control dial fully
upward, the illumination brightness
becomes the maximum level and the
automatic dimming function will not
work at all.
& Auto dimmer cancel function
S03AJ01
If you turn on the parking lights with the
ambient light bright, the illumination bright-
ness of such items will not darken.
The operational/non-operational setting
and sensitivity of the auto dimmer cancel
function can be changed by your SUBARU
dealer. Contact your SUBARU dealer for
details.
Headlight beam leveler
(models with LED headlights)
S03AT
& Automatic headlight beam
leveler
S03AT01
The LED headlights generate more light
than conventional halogen headlights.
Therefore, a driver of an oncoming vehicle
may experience too much glare if your
headlight beam height adjustment is high
when the vehicle is carrying a heavy load.
The automatic headlight beam leveler
adjusts the headlight beam height auto-
matically and optimally according to the
load being carried by the vehicle.
Fog light switch (if equipped)
S03BA
1) Headlight switch
2) Fog light switch
The front fog lights will turn on when the
fog light switch is placed in the “
” position
while the headlights are on (e.g., the
headlight switch is in the “
” position).
To turn off the front fog lights, turn the
switch back down to the “
” position.
– CONTINUED –
Instruments and controls/Headlight beam leveler (models with LED headlights)
3-73
3
To Next Page
Loading...
Need help?
General
