北米Model "A1760BE-A" EDITED: 2020/ 10/ 1
Vehicle Dynamics Control OFF switch
5. Press and hold the Vehicle Dynamics
Control OFF switch for 30 seconds until
the Vehicle Dynamics Control OFF indica-
tor light “
” on the combination meter turns
on and off.
6. Within 5 seconds, release the Vehicle
Dynamics Control OFF switch.
Hill start assist OFF indicator light
7. Within 2 seconds, press back the
Vehicle Dynamics Control OFF switch.
The Hill start assist OFF indicator light
turns on and off.
8. Turn the ignition switch to the “LOCK”/
“OFF” position. The Hill start assist system
is deactivated.
NOTE
When the Hill start assist system is
deactivated, the Hill start assist OFF
indicator light illuminates continu-
ously.
! To reactivate
S07AU0202
To reactivate the Hill start assist system,
repeat steps 1 to 8. When the Hill start
assist system is activated, the Hill start
assist OFF indicator light turns off.
& Hill start assist warning light/
Hill start assist OFF indicator
light (models without the
electronic parking brake sys-
tem)
S07AU01
Refer to “Hill start assist warning light/Hill
start assist OFF indicator light (models
without electronic parking brake system)”
F3-24.
Starting and operating/Hill start assist system
7-52
To Next Page
Loading...
