北米Model "A1760BE-A" EDITED: 2020/ 10/ 1
1) When reversing
2) When either strong automatic braking or
torque control is applied to prevent
collision (in this case, short warning
beeps or continuous warning beeps will
sound)
3) When the vehicle is stopped by the
system (in this case, the continuous
beep will remain sounding)
4) Object (e.g., a wall)
! Detecting range
S07BN0101
1) Detecting range (width): Approximately 6
in (15 cm) outside of the vehicle width
2) Range that the system cannot detect:
Approximately 20 in (50 cm) behind the
rear of the vehicle
3) Detecting range (length): Approximately
5 ft (1.5 m) from the rear of the vehicle
WARNING
If your vehicle is trapped on a rail-
road crossing and you are trying to
escape by reversing through the
crossing gate, the system may re-
cognize the crossing gate as an
obstacle and the brakes may acti-
vate. In this case, remain calm and
either continue to depress the accel-
erator pedal or cancel the system. To
– CONTINUED –
Starting and operating/Reverse Automatic Braking (RAB) system
7-67
7
To Next Page
Loading...
