SubGear xp-3h - Page 53

53
ENGLISH
CCR Diving
Max Operating
Depth MOD SP1
Change the O
2
% mix by (+) and
(–)
ppO
2
Set the oxygen fraction of the Diluent gas mixture and the partial pressure (ppO
2
) selected at the CCR:
3. Change the oxygen fraction in increments of 1% by pushing or . Subgear XP-3H will
display the current fraction of oxygen, the partial pressure (ppO
2
) and the MOD.
4. Confirm the selected percentage with .
Change the ppO
2
by (+) and
(–)
5. By pushing or you can change the ppO
2
in the range of 0.3 to 0.95bar. Subgear XP-3H
will now display the corresponding MOD for the new ppO
2
.
6. Confirm your ppO
2
settings with .
7. Push or until the SP2 menu appears.
8. Confi rm that you wish to change the SP2 setting by pushing .