72
Settings
Setting the alarm clock time
The alarm clock goes off only at the surface. "Sound" must be turned "on" in "set 2".
1. Confirm that you wish to set the alarm time by pushing
.
The hours start to flash.
2. Set the hours by pushing
or .
3. Confirm the setting with
. The minutes start to flash.
4. Set the minutes by pushing or .
5. Confirm the setting with . "On" or "off" starts to flash.
6. "On" indicates "activated" (time of day display shows ), "off" indicates
"deactivated". Switch between "on" or "off" by pressing .
7. Confirm the selected status with
.
Setting the UTC offset (coordinated universal time)
This setting allows you to quickly set the watch to a new time zone without
affecting the actual time setting.
1. Confirm that you wish to set the UTC offset by pushing .
The hours start to flash.
2. Set the hours by pushing or (±13hrs).
3. Confirm the setting with . The minutes start to flash.
4. Set the minutes in increments of 15 minutes by pushing or .
5. Confirm the selected status with .
Adjusting the time of day
You can adjust it to your time zone either in this menu or using the UTC
offset (see above).
1. Confirm that you wish to adjust the time of day by pushing .
The hours start to flash.
2. Set the hours by pushing or .
3. Confirm the setting with . The minutes start to flash.
4. Set the minutes by pushing or .
5. Confirm the setting with .
Selecting 24 hours or AM/PM setting
1. Confirm that you wish to change the setting by pushing .
"On" or "off" starts to flash.
2. Switch with between "on" (AM/PM) and "off" (24h).
3. Confirm the setting with .
The 24h - AM/PM setting influences the display of the date (see below).
Adjusting the date
1. Confirm that you wish to adjust the date by pushing .
The first day (month) starts to flash.
2. Set the day (month) by pushing or .
3. Confirm the setting with . The month (day) starts to flash.
4. Set the month (day) by pushing or .
5. Confirm the setting with . The year starts to flash.
6. Set the year by pushing or .
7. Confirm the setting with .
Time of day
Date (24h setting)
Day / Month / Year
Date (AM/PM setting)
Month / Day / Year
To Next Page
Loading...