600H, 750, 750H, 750HH, 825, 900 & 900H USER MANUAL SECTION 2
22
2.2 DESCRIPTION OF COMPONENTS
Refer to Figure 2-1 and Figure 2-2. The components
and assemblies of the Sullair Portable Air Compressor
models are clearly shown. The package includes a
compressor, diesel engine, compressor inlet system,
compressor cooling and lubrication system,
compressor discharge system, capacity control
system, instrument panel and electrical system. The
machine is also supplied with sound deadening
insulation to lower noise emissions to meet EPA or
CE, and/or any Federal, State, or local noise
requirement. The Sullair compressor unit is driven by
an industrial engine designed to provide enough
horsepower at rated conditions. Refer to Engine
Operator’s Manual for a more detailed description of
the engine.
The engine cooling system is comprised of a radiator,
high capacity fan and thermostats. The high capacity
fan draws air through the radiator, keeping the engine
at the proper operating temperature.
The same fan also cools the fluid in the compressor
cooling and lubrication system. While passing through
the radiator, the fan air also passes through the
compressor fluid cooler (which is mounted adjacent to
the radiator). As air passes through the cooler, the
heat of compression is removed from the fluid.
The same fan also cools the engines intake air supply
by passing air through an air to air aftercooler (charge
Figure 2-2: Component and Assemblies rear view.
1.MOISTURE SEPARATOR
2.THERMAL VALVE
3.REGULATOR VALVES
4.ENGINE COOLANT FILL
5. FLUID COOLER
6. AFTERCOOLER
7 . E N G I N E C H A R G E A I R
COOLER
8.ENGINE RADIATOR
9.DISCHARGE AIR FILTER
10.RECEIVER TANK
11. E-STOP
12.ENGINE MUFFLER
13.MANUAL ENCLOSURE
14.BATTERY DISCONNECT
SWITCH
15.DEF FILL
16.FUEL FILL
17.FUEL SELECTOR SWITCH
18.FUEL PRIMER
To Next Page
Loading...
