SECTION 3 600H, 750, 750H, 750HH, 825, 900, 900H, USER MANUAL
45
changed if this condition develops.
When ambient conditions exceed those noted or if
conditions warrant use of other extended life
lubricants, contact Sullair for recommendations.
Sullair encourages the user to participate in a fluid
analysis program. This could result in a fluid change
interval differing from that stated in the manual.
Sullair offers a fluid analysis program for Sullair
AWF. Contact your local Sullair representative for
details.
D-A Lubricant® Company Inc. offers an analysis
program for users of D-A products and Sullair AWF.
Contact your D-A Lubricant® representative for
details.
3.5 LUBRICATION GUIDE, ENGINE
For engine oil specifications, refer to the Engine Operator’s Manual.
CAUTION
DO NOT mix types of fluids. Combinations
of different fluids may lead to operational
problems such as foaming, filter plugging,
orifice or line plugging.
Figure 3-1: Fluid Fill Location
1. Sight Glass (I)
2. Fluid Fill Port
*** If fluid is seen in the sight glass when the
machine is not running, no fluid is needed.
To Next Page
Loading...
