SECTION 3 600H, 750, 750H, 750HH, 825, 900, 900H, USER MANUAL
49
3.7 IDENTIFICATION, TANDEM AXLE (DTQ)
NOTES
A1:
DIMENSIONS ARE IN INCHES
[] DIMENSIONS ARE IN MILLIMETERS.
A2:
ALL DOORS REQUIRE 5 FOOT [1524]
CLEARANCE.
A3:
REAR DOOR ACCESS BATTERIES AND
COOLERS.
A4:
REFERENCE: A STANDARD 40’ CONTAINER SIZE IS
88” WIDE X 89” TALL X 234” LONG.
A5:
REFERENCE: TWO COMPRESSORS CAN FIT IN A 40’
HIGH CUBE CONTAINER.
A6: COOLING AIR INTAKE (3)
A7: WATER CONDENSATE DRAIN (DO NOT PLUG)
A8: ENGINE COOLANT DRAIN
A9: ENGINE OIL DRAIN
A10: COMPRESSOR OIL DRAIN
A11: DRAIN PLUG (4)
A12: HAND BRAKE
A13: TIEDOWN (4)
A14: 100% SPILL CONTAINMENT FRAME
A15: FUEL FILL
A16: AUX. FUEL PORTS
A17: LIFTING BAIL
A18: COOLING AIR EXHAUST (3)
A19: HYDRAULIC SURGE BRAKE (OPTIONAL)
A20: AIR CONTROL DOOR
A21: INSTRUMENT PANEL DOOR
A22: E-STOP
A23: DOOR (4)
A24: OVERALL HEIGHT
A25: SEPARATOR TANK FILTER
A26: ENGINE EXHAUST AIR OUT
A27: ENGINE COOLANT PORT ACCESS COVER
A28: ENGINE AIR INTAKE
A29: UNIT AIR INTAKE
A30:
BREAK AWAY BOX (ELECTRIC BRAKES ONLY)
(STANDARD)
A31: STABILIZING JACK
A32: TOWING RING
A33: SAFETY CHAIN
A34:
2” NPT AFTER-COOLED AIR DISCHARGED (AFTER-
COOLED MODELS ONLY)
A35: 2” NPT STANDARD AIR DISCHARGE
A36: TRACK WIDTH
A37: DEF FILL
NOTES
To Next Page
Loading...
