SECTION 3 600H, 750, 750H, 750HH, 825, 900, 900H, USER MANUAL
51
3.8 IDENTIFICATION, 4-WHEEL (DWQ)
NOTES
A1:
DIMENSIONS ARE IN INCHES
[ ] DIMENSIONS ARE IN MILLIMETERS.
A2:
ALL DOORS REQUIRE 5 FOOT [1524]
CLEARANCE.
A3:
REAR DOOR ACCESS BATTERIES AND
COOLERS.
A4:
REFERENCE: A STANDARD 40’ CONTAINER SIZE IS
88” WIDE X 89” TALL X 234” LONG.
A5:
REFERENCE: THREE COMPRESSORS CAN FIT IN A 40’
HIGH CUBE CONTAINER.
A6: COOLING AIR INTAKE (3)
A7: WATER CONDENSATE DRAIN (DO NOT PLUG)
A8: ENGINE COOLANT DRAIN
A9: ENGINE OIL DRAIN
A10: COMPRESSOR OIL DRAIN
A11: DRAIN PLUG (4)
A12: TIE DOWN (4)
A13: 100% SPILL CONTAINMENT FRAME
A14: FUEL FILL
A15: AUX. FUEL PORTS
A16: LIFTING BAIL
A17: COOLING AIR EXHAUST (3)
A18: AIR CONTROL DOOR
A19: INSTRUMENT PANEL DOOR
A20: E-STOP
A21: DOOR (4)
A22: OVERALL HEIGHT
A23: SEPARATOR TANK FILTER
A24: ENGINE EXHAUST AIR OUT
A25: ENGINE COOLANT PORT ACCESS COVER
A26: ENGINE AIR INTAKE
A27: UNIT AIR INTAKE
A28: TOWING RING
A29:
2” NPT AFTER-COOLED AIR DISCHARGED (AFTER-
COOLED MODELS ONLY)
A30: 2” NPT STANDARD AIR DISCHARGE
A31: TRACK WIDTH
A32: DEF FILL
NOTES
To Next Page
Loading...
