Sullair LS-200 - Section 2 Description; 2.1 Introduction to Sullair Compressors; 2.2 Description of Components; 2.3 Sullair Compressor Unit Function

TABLE OF CONTENTS
PAGE
Section 7
OPERATION-
SUPERVISOR CONTROLLER 47 7.1 INTRODUCTION
47 7.2 PURPOSE OF CONTROLS GUIDE- SUPERVISOR
CONTROLLER
48 7.3 INITIAL START-UP PROCEDURE
48 7.4 SUBSEQUENT START-UP PROCEDURE
48 7.5 SHUTDOWN PROCEDURE
Section 8
MAINTENANCE
49 8.1 GENERAL
49 8.2 DAILY OPERATION
49 8.3 MAINTENANCE AFTER INITIAL 50 HOURS
OF OPERATION
49 8.4 MAINTENANCE AFTER FIRST 1000 HOURS
49 8.5 MOTOR BEARINGS
49 8.6 FLUID MAINTENANCE
49 8.7 PARTS REPLACEMENT AND ADJUSTMENT
PROCEDURES
49 FLUID FILTER MAINTENANCE
50 AIR FILTER MAINTENANCE
50 AIR FILTER ELEMENT REPLACEMENT
50 SEPARATOR MAINTENANCE
51 OIL RETURN/ SIGHT GLASS MAINTENANCE
52 CONTROL SYSTEM ADJUSTMENT
52 FOR PRESSURE RANGE ADJUSTMENT:
52 FOR DIFFERENTIAL ADJUSTMENT:
53 PRESSURE REGULATOR ADJUSTMENT
53 COMPRESSORS WITH SPIRAL VALVE
54 SHAFT COUPLING MAINTENANCE
54 INSPECTION/REMOVAL OF FLEXIBLE ELEMENT
55 Figure 8-8 Piping and Instrumentation Diagram- Supervisor
56 Figure 8-9 Piping and Instrumentation Diagram- Electro-Mechanical
Section 9
TROUBLESHOOTING 57 9.1 TROUBLESHOOTING
57 9.2 TROUBLESHOOTING GUIDE
Continued ...