PAGE
Section 10
VARIABLE SPEED DRIVE
APPLICATIONS
61 10.1 DESCRIPTION OF COMPONENTS
57 10.2 CONTROL SYSTEM, FUNCTIONAL DESCRIPTION
64 Figure 10-1A Piping and Instrumentation- V-200 Air-cooled
68 Figure 10-1B Piping and Instrumentation- V-200 Air-cooled
72 Figure 10-2A Identification- V-200 Air-cooled
73 Figure 10-2B Identification- V-200 Water-cooled
Section 11
ILLUSTRATIONS AND
PARTS LIST
75 11.1 PROCEDURE FOR ORDERING PARTS
75 11.2 RECOMMENDED SPARE PARTS LIST
78 11.3 MOTOR, COMPRESSOR, FRAME AND PARTS
82 11.4 AIR INLET SYSTEM- AIR-COOLED
84 11.5 AIR INLET SYSTEM- WATER-COOLED
86 11.6 FLUID COOLING SYSTEM- AIR-COOLED
88 11.7 FLUID COOLING SYSTEM- WATER-COOLED
90 11.8 AIR PIPING SYSTEM- AIR-COOLED
92 11.9 AIR PIPING SYSTEM- WATER-COOLED
94 11.10 FLUID PIPING SYSTEM- AIR-COOLED
96 11.11 FLUID PIPING SYSTEM- WATER-COOLED
98 11.12 SUMP AND PARTS
102 11.13 MOISTURE DRAIN ASSEMBLY- AIR-COOLED
104 11.14 MOISTURE DRAIN ASSEMBLY- WATER-COOLED
106 11.15 PNEUMATIC CONTROLS- LS-200 AND VCC-200
108 11.16 PNEUMATIC CONTROLS- V-200
110 11.17 CONTROL BOX- LS-200 AND VCC-200
SUPERVISOR CONTROLLER
114 11.18 CONTROL BOX- V-200 SUPERVISOR CONTROLLER
118 11.19 CONTROL BOX- ELECTRO-MECHANICAL
122 11.20 CONTROL PANEL- ELECTRO-MECHANICAL
124 11.21 ENCLOSURE- AIR-COOLED (WITHOUT TEFC MOTOR)
126 11.22 ENCLOSURE- AIR-COOLED (WITH TEFC MOTOR)
128 11.23 ENCLOSURE- WATER-COOLED ODP & TEFC MOTORS
(VCC-200 ODP ONLY)
130 11.24 ENCLOSURE- WATER-COOLED (WITH TEFC MOTOR)
132 11.25 DECAL GROUP
138 11.26 DECAL LOCATIONS- LS-200 AND VCC-200
OPEN AIR-COOLED
TABLE OF CONTENTS
Continued ...
To Next Page
Loading...
