Need help?Do you have a question about the Summa SummaSign T1010 and is the answer not in the manual?
Procedures for replacing external covers, plates, and related components.
Instructions for replacing motors, drive drums, belts, and camrollers.
Troubleshooting for motor faults, axis movement errors, and position issues.
Addresses voltage problems, communication failures, and data transmission errors.
Troubleshooting for ROM, RAM, NVRAM, and internal system faults.
Resolves issues with marker sensing and detecting the knife's home position.
General| Max Cutting Length | unlimited |
|---|---|
| Contour Cutting | Yes |
| Power Requirements | 100-240 V, 50/60 Hz |
| Cutting Speed | 1000 mm/s |
| Connectivity | USB |
| Cutting Force | 400 grams |
| Maximum Media Width | 1010 mm |
| Repeatability | 0.1 mm |
To Next Page