Need help?Do you have a question about the Summa SummaSign T610 and is the answer not in the manual?
Explains the functions of the LCD and control panel keys on the SummaSign cutters.
Procedures for replacing covers, motors, PCBs, heads, and drums of the cutter.
Step-by-step guide for replacing flat cables and other assemblies like belts.
Instructions for cleaning the drive drum sleeves to ensure proper media traction.
Guide on how to convert the cutter's operating voltage and change fuses.
Procedure for resetting and configuring the machine type after PCB replacement.
Troubleshooting guide for 'ERROR IN X-AXIS' and 'ERROR IN Y-AXIS POSITION'.
Actions for resolving 'LOW LINE VOLTAGE' and 'HIGH LINE VOLTAGE' errors.
Detailed steps for removing, replacing, and setting the motor on a T-head.
To Next Page
General