Chapter 2 Using Dynamic Reconfiguration 9
The following table lists the attachment point IDs for all of the Sun Fire V890 PCI
slots.
The following table describes the values that may appear in the Type, Receptacle,
Occupant, and Condition columns of the basic status display. The values listed for
the Type column represent the most common board and card types.
Slot Attachment Point ID
PCI slot 0 PCI0
PCI slot 1 PCI1
PCI slot 2 PCI2
PCI slot 3 PCI3
PCI slot 4 PCI4
PCI slot 5 PCI5
PCI slot 6 PCI6
PCI slot 7 PCI7
PCI slot 8 PCI8
Column Entry Meaning
Type mult/hp Multifunction (hot-pluggable PCI card)
ethernet/hp Gigabit Ethernet (hot-pluggable PCI card)
pci_pci/hp Quad Ethernet (hot-pluggable PCI card)
scsi/hp SCSI (hot-pluggable PCI card)
raid/hp Hardware RAID (hot-pluggable PCI card)
tokenrg/hp Token Ring (hot-pluggable PCI card)
fddi/hp FDDI (hot-pluggable PCI card)
atm/hp ATM (hot-pluggable PCI card)
network/hp Network interface (unspecified type, hot-pluggable PCI card)
storage/hp Storage interface (unspecified type, hot-pluggable PCI card)
display/hp Graphics interface (unspecified type, hot-pluggable PCI card)
pci-card/hp PCI card (unspecified type, hot-pluggable PCI card)
unknown Board or card type cannot be determined
cpu/mem CPU/Memory board
To Next Page
Loading...
Need help?
General
