Chapter 2 Installing the Sun XVR-600 Graphics Accelerator Software 17
4. Select the Sun OpenGL for Solaris version and press Return.
The following is displayed. (Option 1, Sun OpenGL 1.3 for Solaris, is selected for this
example on a Solaris 8 operating environment.)
5. Press Return to begin installation.
When complete, the following is displayed:
Note – Depending on your system configuration and time of installation, the actual
output from the installation process might differ from what is shown below.
6. Shut down the system after the Sun XVR-600 graphics accelerator software is
installed:
See the shutdown(1M) and boot(1M) man pages for more details.
7. Install the Sun XVR-600 graphics accelerator hardware.
Go to Chapter 3 for information on installing the Sun XVR-600 graphics accelerator
hardware.
8. Boot your system at the ok prompt:
Halt (Stop-A) your system for the ok prompt.
This script is about to take the following actions:
- Install Sun XVR-600 Graphics Accelerator software
- Install Sun XVR-600 Graphics Accelerator patch(es) 114554-09
- Install Sun OpenGL 1.3
Press return to continue, or ’Q’ to quit:
*** Installing Sun XVR-600 Graphics Accelerator packages...
*** Installing patch 114554-09 for Solaris 8...
*** Installing Sun OpenGL 1.3 packages...
*** Done. A log of this installation is at:
/var/tmp/XVR-600.install.2003.09.16
# shutdown
ok boot -r
To Next Page
Loading...