18 Sun XVR-600 Graphics Accelerator Installation and User’s Guide • May 2004
Removing the Software
1. Log in as superuser.
2. Insert the Sun XVR-600 graphics accelerator CD into the drive.
■ If the drive is already mounted, type the following, and go to Step 3:
■ If the CD is not already mounted, type:
3. To remove the Sun XVR-600 graphics accelerator software, become superuser and
type:
The following list of options is displayed:
4. Select Option 3 to remove all listed software packages.
The following text is displayed:
# cd /cdrom/cdrom0
# mount -F hsfs -O -o ro /dev/dsk/c0t6d0s0 /cdrom
# cd /cdrom
# ./uninstall
This program removes the software for the Sun XVR-600 and Sun
XVR-1200 Graphics Accelerators. This removal process refers to the
Sun XVR-600 Graphics Accelerator, but applies to the Sun XVR-1200
Graphics Accelerator as well.
1) Remove Sun XVR-600 Graphics Accelerator support
2) Remove Sun OpenGL
3) Remove All (Sun XVR-600 Graphics Accelerator and Sun OpenGL)
4) Quit
Select an option:
About to take the following actions:
- Remove Sun XVR-600 Graphics Accelerator support
- Remove Sun OpenGL
Press ’q’ to quit, or press any other key to continue:
To Next Page
Loading...