Appendix A Setting the Default Console Display 43
6. Connect your monitor cable to the Sun XVR-600 graphics accelerator on your
system back panel.
7. To set a resolution (for example, 1280
× 1024 × 112), type:
Reset the system:
You can get a list of available resolutions for your display device by typing the
following:
ok setenv output-device mydev:r1280x1024x112
output-device=mydev:r1280x1024x112
ok reset-all
ok cd /pci@8,700000/SUNW,XVR-600@1
ok .screen-resolutions
To Next Page
Loading...