EM6910 Café Series Espresso Machine Issue: A Page 20 of 48
• Beep 4 times, and return to idle mode.
Figure 14 - Cleaning Cycle Diagram
With a blocked filter in the shower head, under coffee function, the needle of
the pressure gauge shall reach to maximum and there shall be no water leak
from all internal plumbing connections.
Serial number shall be used to identify the each unit.
Steam quality test under factory setting:
• Unit starts from cold and after ready lights are on, switch ON
steam function for 10 seconds to get remove initial water in the
plumbing.
• Collect water from the steam outlet over a period of 1 minute of
steaming into a small Milk Frothing Jug with the steam output jet
removed.
• The maximum water quantity in the jug must be less than 17.5g.
To Next Page
Loading...
