EasyManua.ls Logo

Sunbeam EM6910 - Safety Precautions

Sunbeam EM6910
30 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EM6910 Café Series Espresso Machine Issue: A Page 3 of 48
SAFETY PRECAUTIONS FOR YOUR SUNBEAM ESPRESSO
MACHINE
Always place the unit on a flat, level surface.
Do not operate without water in reservoir. Fill reservoir with only clean, cold water.
The maximum filling volume is 3 litres.
Do not remove the filter handle during the espresso pour or water flow as the unit
is under pressure. Removing the filter handle during either of these operations
can lead to scalding or injury.
The steam wand and hot water tap become very hot during texturing milk and
water flow. This may cause burns in case of contact, therefore avoid any direct
contact with the steam wand or hot water tap.
Always disconnect the plug from the power outlet prior to cleaning the espresso
machine or if there is any problem during the coffee making process.
Do not allow the power cord to come into contact with the hot parts of the
espresso machine, including the cup warming plate, hot water tap and steam
wand.
Do not place hands directly under the steam, hot water or coffee pour as
this can lead to scalding or injury.
Michael O'Donnell 1/5/07 4:53 PM
Formatted: Font color: Auto

Related product manuals