Suncorp Move2500 - Taxi Application

PAGE 37 OF 52
EFTPOS MERCHANT FACILITIES
QUICK REFERENCE GUIDE (MOVE2500/MOVE5000)
Merchant Functions
Taxi Application
The Taxi Application is only available on the Move 5000 terminal.
Prior to processing transactions the Driver ID, Vehicle No and ABN must be set.
Set Driver ID
— Press the MENU button from the Home screen.
— Select 5 for Taxi.
— Press Enter to select Driver ID.
— Type in an alphanumeric Drivers ID up to eight characters in length.
— Press Enter.
Set Vehicle No
— Highlight Vehicle No by tapping the option on the screen.
— Type in an alphanumeric Vehicle No. up to eight characters in length.
— Press Enter.
Set ABN
— Highlight ABN by tapping the option on the screen.
— Type in the 11 character ABN.
— Press Enter.
Once set, cancel out of the menu to the Home screen to begin processing transactions.
Changing the Service Fee
The service fee is set to 5% including GST. If you require this to be changed follow the steps
below.
If the terminal is replaced due to a fault the replacement terminal will need to be
reprogrammed with the service fee if it is not 5% including GST.
— Press the MENU button
from the Home screen.
— Select 5 for Taxi.
— Highlight Service Fee by tapping the option on the screen.
— Press Enter.
— Type in the Taxi password - (This can be obtained by calling technical support).
— Press Enter.
— Type in the Surcharge which needs to be multiplied by 100, if you want 2%, type in 200.
— Press Enter.