Need help?Do you have a question about the Sungrow SG50CX-P2 and is the answer not in the manual?
General| Rated Power | 50 kW |
|---|---|
| Max. DC Voltage | 1100 V |
| MPPT Voltage Range | 200 V - 1000 V |
| Max. Input Current per MPPT | 26 A |
| Number of DC Input Terminals per MPPT | 2 |
| Rated AC Output Power | 50 kW |
| Max. AC Output Power | 55 kW |
| AC Nominal Voltage | 400 V |
| AC Voltage Range | 310 V - 480 V |
| AC Grid Frequency | 50 Hz / 60 Hz |
| Grid Frequency Range | 45 Hz - 55 Hz / 55 Hz - 65 Hz |
| Total Harmonic Distortion | <3% |
| DC Switch | Yes |
| Protection Class | I |
| Cooling Method | Smart Forced Air Cooling |
| Protection Degree | IP66 |
| Maximum Efficiency | 98.7% |
| Topology | Transformerless |
| Power Factor at Rated Power | 0.8 leading to 0.8 lagging |
| Operating Temperature Range | -25°C to +60°C |
| Communication | RS485, Ethernet |
To Next Page
