1 Safety Instructions User Manual
2
There is a risk of injury due to improperly handling the device!
Always follow
the instructions in the manual when moving and
positioning the inverter.
Injuries, serious wounds, or bruis
e may follow if the device is improperly
handled.
During Installation
Make sure inverter is not electrically connected before installing the
inverter.
System performance loss due to bad ventilation!
The equipment requires good quality ventilation during operation. Keep
the unit upright and nothing covering the heatsink.
During Electrical
All electrical connection must be in accordance with national and local
standards.
The connection to the grid can be done only after receiving approval from
the local utility grid company.
Lethal voltage exists!
PV arrays will produce electrical energy when exposed to sunlight and thus can
create potential electrical shock hazards.
All cables must be firmly attached, undamaged, properly insulated and
adequately dimensioned.
To Next Page
Loading...
Need help?
General
