Sungrow SG80KTL User Manual

User Manual 10 Operation of LCD Display
75
Press

to move the cursor and press

to change
value. Press ENTER to confirm setting.
The positive symbol “+” can be changed to the
negative symbol “-”.
The adjustment range is from -9999 to +9999 kWh.
(Energy-adj value)= (Real measured value) - (E-tot
reading value).
Energy-adj
+0000kWh
10.9.4 Load Default
All history information will be unrecoverable cleared and all parameters will
return to the default value except the protective parameters and time once
the “load default” operation is performed.
Main Screen (Press ENTER)→Menu (Press ×3)→Set-param(Press ENTER)→Enter
password (Press ENTER)→Sys-param(Press ENTER, Press ×3)→Load default (Press
ENTER)
Press ENTER to confirm “load default”.
Load default
Confirm resume setting?
10.9.5 Checking Firmware Version
Main Screen (Press ENTER)→Menu (Press  ×3)→Set-param(Press ENTER)→Enter
password (Press ENTER) → Sys-param(Press ENTER, Press ×4) → Firmware
version(Press ENTER)

Sungrow SG80KTL Specifications

General

Brand	Sungrow
Model	SG80KTL
Category	Inverter
Language	English