Machine Discarding
1. To discard the machine, please take it to the disassembly center or an authorized machine
collection center.
2. Before scrapping the machine, the following materials must be disassembled and separated,
and sent to the appropriate machine collection center according to the current environmental
health regulations:
(1) Brush
(2) Filter
(3) Electrical and Electronic Components and Parts (*)
(4) Power Supply Equipment
(5) Plastic Parts (Water Tank and Handle)
(6) Metal Parts (Rod and Rack)
Note: (*) In particular, to discard electrical and electronic components and parts, please contact
the dealer nearest.
Normal operation of the Machine
1. Make sure that the clean water tank is filled with enough water, the sewage tank is emptied and
the battery is fully charged.
2. According to the road conditions, select the buttons for increasing and decreasing the cleaning
intensity (ECO/ON or ECO/OFF) and water output and the driving speed regulating knob.
3. Press the start button, the brush tray will automatically fall, and the suction scraper needs to be
put down manually.
4. Hold down the two buttons on the control handle with both hands, and the floor washer will
start to move forward or backward. Hold down any button on the control handle, and the speed
will be halved.
5. Choose the function of floor cleaning or vacuum cleaning separately.
6. In case of emergency, shoot the emergency button switch and stop the machine.
To Next Page
Loading...
