Instructions for Use and Maintenance of Charger
33. Use and Connection of Battery Charger(Fig. 26)
1. Move the machine near the battery charger.
2. Make sure the sewage tank is empty, if not, empty it.
3. Check that the key switch (9) of the machine control panel is in the OFF state.
4. Check whether the capacity and models of the battery charger are suitable for the batteries of
this machine.
5. Connect the charger output connector to the machine charging socket (14) firstly, and then
connect the charger input plug to the power supply.
6. The battery charger provided in the package with this instruction bag. Be sure to install the
battery charger plug according to the instructions in the manual and insert it correctly with the
machine charging plug (14).
7. Only use the battery charger designed by this machine, otherwise the battery may be damaged.
Warning: Please read the instructions for the use and maintenance of the battery charger
carefully.
Warning: It is forbidden to completely discharge the battery, even if the machine is not in
use, the battery cannot be left in a state of power loss.
Warning: This process needs to be operated by professionals. Incorrect connection may
affect the normal operation of the machine.
Warning: Before connecting the battery charger power cord to the socket, please ensure that
there is no condensate or other forms of liquid.
Warning: Attention should be paid to the danger of gas release and corrosive liquid
leakage.
Warning: Attention should be paid to the fire danger, and please keep away from open
flames.
To Next Page
Loading...
