SunStar SWF/C-UH1508-45 - Page 67

7-23
[Mirror on the X axis]
④ Mirror: Reverses the design on the X axis, the Y axis, or both.
[No] [YES]
[No]
[No]
[YES]
[YES]
[Mirror on the Y axis]
[Mirror on the X & Y axis]
⑤ START ST: Selects the start location on the design. You can skip certain number of stitches and start from the
desired location.
Start
Start
End
End
Empty stitch=5,000[st]
Total stitch
=10,000[st]
Start stitch
=5,000[st]