SunStar SWF/C-UK1504 - Page 74

7-30
Ex) Calling and tracing a design in memory #5
Call design from #5 using EMB
CALL.
Press
Move the cursor to “2. Design Trace”
and press
Press when the trace is
finished
NO : 5
STITCH : 18294
COLOR : 7
JUMP : 7
1. LENGTH MEASURE
2. DESIGN TRACE
3. OPTIMIZE TRACE
Frame traces the design with this screen.
FRAME TRACE
[CAUTION]
If the frame hits the needle bar or any other part of the machine during tracing, press immediately and
then press .