SunStar SWF/C-UK1504 User Manual

MMMMEE--110000442222
USER
’’
S MANUAL
SSuunnSSttaarr CCOO..,, LLTTDD..
TWO-HEAD AUTOMATIC
EMBROIDERY MACHINE
FOUR-HEAD AUTOMATIC
EMBROIDERY MACHINE
SIX-HEAD AUTOMATIC
EMBROIDERY MACHINE
EIGHT-HEAD AUTOMATIC
EMBROIDERY MACHINE
SIX-HEAD AUTOMATIC
EMBROIDERY MACHINE
(Compact Type)
SWF/C-Series

SunStar SWF/C-UK1504 Specifications

General

Brand	SunStar
Model	SWF/C-UK1504
Category	Sewing Machine
Language	English

Summary

CHAPTER 1 SAFETY RULES

DELIVERY OF YOUR MACHINE

Instructions for safely delivering the embroidery machine.

INSTALLATION

Guidelines for installing the embroidery machine.

MACHINE OPERATION

Safe operating procedures for the embroidery machine.

REPAIR

Guidelines for repairing the embroidery machine.

CHAPTER 2 INSTALLATION AND MACHINE ASSEMBLY

ELECTRICITY INSTALLATION

Details electrical requirements for machine installation.

LEVELING THE MACHINE

Instructions on how to level the embroidery machine accurately.

CHAPTER 5 FUNCTIONS FOR BASIC MACHINE OPERATION

NAMES AND FUNCTIONS OF PARTS IN OPERATION BOX

Details the names and functions of operation box parts.

EMERGENCY POWER AND START/STOP BUTTONS

Explains the function of emergency power and start/stop buttons.

EMERGENCY STOP

Instructions on how to use the emergency stop function.

UPPER THREADING AND TENSION ADJUSTMENT

Guides on upper threading and tension adjustment.

LOWER (BOBBIN) THREADING AND TENSION ADJUSTMENT

Instructions for lower threading and tension adjustment.

NEEDLE- HOOK TIMING CONTROL

Instructions for controlling needle-hook timing.

CHAPTER 7 NAVIGATING THE CONTROL PANEL

INSTALLING THE OPERATING SYSTEM

Steps for installing the machine's operating system.

MAIN INDICATION SCREEN

Explains the main indication screen and its components.

THE FUNCTION MENU

Overview of the function menu structure and options.

CHAPTER 8 ERROR MESSAGES AND CORRECTION

MAIN SHAFT MOTOR

PULSE MOTORS ON X AND Y AXIS

CHAPTER 9 THE CONTROL BOX

CHANGING FUSE IN JOINT BOARD OF M/C WITH LESS THAN 12 HEADS

CHANGING FUSE IN M/C WITH MORE THAN 12 HEADS

CHAPTER 10 MAINTENANCE AND INSPECTION

CHECK POINTS FOR REGULAR INSPECTION

Key points to check during regular machine inspections.

CLEANING

OIL SUPPLY

CHAPTER 11 MACHINE ADJUSTMENTS

ADJUSTING THE TRIMMERS

CORRECT POSITION OF NEEDLE

CHAPTER 12 TROUBLESHOOTING

Operation failure

Thread breaks

Skipped Stitches