41
Note:
1. (xxxx) stands for low current output setting value; (yyyy) stands for high current
output setting value.
pH mode: setting range -2.00~16.00 pH; for example, 5.00 pH is set as (500)
ORP mode: setting range -1999~1999 mV; for example, -250 mV is set as (-250)
2. (xxxx) stands for low current output setting value; (yyyy) stands for high current
output setting value.
Temperature setting range -30.0~130.0 ℃; for example, 25.0 ℃is set as (250)
3. (xxxx) stands for high point alarm setting value; (yyy) stands for high point
hysteresis setting value.
Alarm setting range:
pH mode: -2.00~16.00 pH; for example, 5.00 pH is set as (500)
ORP mode: -1999~1999 mV; for example, -250 mV is set as (-250)
Hysteresis setting range:
pH mode: 0.00~2.00 pH; for example, 0.20 pH is set as (20)
ORP mode: 0~200 mV; for example, 50 mV is set as (50)
4. (xxxx) stands for high point alarm setting value; (yyy) stands for high point
hysteresis setting value.
Alarm setting range:
pH mode: -2.00~16.00 pH; for example, 5.00 pH is set as (500)
ORP mode: -1999~1999 mV; for example, -250 mV is set as (-250)
Hysteresis setting value:
pH mode: 0.00~2.00 pH; for example, 0.20 pH is set as (20)
ORP mode: 0~200 mV; for example, 50 mV is set as (50)
5. (xxxx) stands for the manual temperature setting value when the temperature
compensation is OFF; the temperature difference correction when the temperature
compensation way is AUTO/P; or no function when the temperature
compensation way is AUTO/N.
Manual temperature setting range: -30.0~130.0 ℃; for example, 45.0 ℃is set as
(450)
Temperature difference correction range: 0.0~5.0 ℃; for example, 2.1 ℃is set as
(21)
To Next Page
Loading...