Operation
NT 10000...NT 12000 69
Internet dial-in via modem
Modem settings If you use a modem for the Internet connection, the modem must be set up ac-
cordingly via the Sunways Browser. Therefore, first establish a connection bet-
ween your PC and the Solar Inverter (see section Direct Ethernet connection).
With the web browser you can then make the following settings in the menu
Settings– Modem:
Ueb.Upd. Monitoring software
Com Upd. Communication software
Wif Upd. Web interface
DWifUpd. Dynamic web interface
MenSUpd. Menu structure
MenFUpd. Menu error texts
WifSUpd. Web interface status texts
RWP.Upd. Read/write parameters
ROP.Upd. Read only parameters
ParaUpd. Parameter update
Min Upd. Update of the minute values in the data logger files
Day Upd. Update of the daily values in the data logger files
Mon Upd. Update of the monthly values in the data logger files
YearUpd. Update of the annual values in the data logger files
SMinUpd. Update of the minute values in the system data logger files
SDayUpd. Update of the daily values in the system data logger files
SMonUpd. Update of the monthly values in the system data logger files
SYerUpd. Update of the annual values in the system data logger files
Display text Update type
To Next Page
Loading...
