3.7 Switch message setting
When switch positions are changed, there is an option to display a message on the display
which can be turned on or off.
• Turn channel selector to SWITCH MESSAGE menu item
• There are two options, OFF and ON
• Press the channel selector to toggle the option value and save desired setting
3.8 Message delay setting
This menu allows you to adjust the length of time messages are displayed when switch
positions are changed.
• Turn channel selector to MESSAGE DELAY menu item
• Press the channel selector, ADJUST is shown
• Turn the channel selector to select the required display time in milliseconds as shown on the
frequency display
• Press the channel selector to save the desired setting
4. Other information
Values are noted below for when the radio was converted for reference:
Radio serial number: 21208 Conversion date : 07/2023 SW Ver: 26062023
Menu number Setting Value
3 Frequency -117
4 Transmit offset 0
Page 12 / 13
To Next Page
Loading...
