SUPERMAX SPECIFICATIONS
SUPERMAX 25 & 37 (single drum); SUPERMAX 25x2 & 37x2 (dual drum)
Dimensions: Model 25 & 25x2: Height: 43 3/4"; Width: 46"; Depth: 31"
Model 37x2: Height: 49"; Width: 58"; Depth 31"
Dust Hood: Model 25 & 25x2: 4" vacuum port, hinged back. Model 37 & 37x2: Two 4" vacuum ports, hinged back.
Drums: Model 25: 5" x 25"; Model 25x2: Two 5" x 25"; Model 37: 5" x 37"; Model 37 x 2: Two 5" x 37"
All drums extruded aluminum, precision machined and balanced, 1,600 RPM.
Bearings: All Models: 1" sealed, permanently lubricated, flanged ball bearings.
Abrasive Strips:
Tapered aluminum oxide or ceramic cloth-backed abrasive strips recommended.
Fasteners accept any grit. No felt, velcro, or adhesive necessary. One strip included.
Conveyor Bed: All Models: Steel conveyor bed reinforced with four steel cross sections.
Conveyor Motor: All Models: 100 in-lbs. torque, direct-drive DC motor. Infinitely variable from 0 to 15 feet per minute with Intellisand.
Conveyor Belt: All Models: 100-grit abrasive conveyor belt included.
Stand Construction: All Models: Cast aluminum, zinc-plated steel. Column tubes are centerless ground.
Drive Motor: All Models: 5 HP; TEFC; 1,740 RPM; 208-230 volts; 60 HZ.
Minimum Stock Length: Models 25 & 37: 2 1/2"; Models 25x2 & 37x2: 3 1/2"
Height Adjustment: All Models: 3/32" per turn; Depth Gauge included.
Stock Thickness Capacity: 25 and 25x2: 6"; 37 and 37x2: 12"
Shipping Weight: Model 25: 350 lbs.; Model 25x2: 375 lbs.; Model 37: 400 lbs.;
Model 37x2: 455 lbs.
Dust Collection: Mandatory for all models.
To Next Page
Loading...
