16
A+ Server AS -2024S-TR User's Manual
Quick Reference Table
Jumper Description Default Setting
JBT1 Clear CMOS Open (Normal)
JD1 Power LED and Speaker/Buzzer Pins 4-7
JPFR1 Manufacturer Mode Open (Normal)
JPFR3 PFR Function Open (Normal)
JPL1 Onboard LAN Enable/Disable Pins 1-2 (Enabled)
JPVGA1 VGA I/O Enable/Disable Pins 1-2 (Enabled, rear VGA output)
JUID FP1 Switch Pins 1-2
JWD1 Watch Dog Pins 1-2 (Reset)
LED Description Status
LED2 Overheat/Fan Failure LED
Green: Blinking (BMC normal)
Green: Fast blinking (BMC initializing)
LED3 Onboard Power LED
Solid Green: System On
LEDM1 BMC Heartbeat LED Blinking Green: Normal
UID LED1 Unit ID LED Solid Blue: UID switched to ON
Connector Description
Battery Onboard CMOS Battery
CN1/CN2 NVMe Ports
FAN1 - FAN6, FANA, FANB System Fan Headers
FP1 Supermicro Front Control Panel Connector for FPB-FP826-T
JCOM1 COM Port
JF1 Front Control Panel Header
JIPMB1 4-pin BMC External I
2
C Header
JL1 Chassis Intrusion Header
JLAN1/2 1Gbe LAN Ports
JPWR1/2 8-pin Auxilliary Power Connectors (+12V)
JPWR3 24-pin Main Power Connector
JSD0/1 SATA3 DOM (Device on Module) Power Connectors
JSTBY1 Standby Power Connector (+5V)
JTPM1/2 Trusted Platform Module (TPM)/Port 80 Connectors
JUSB1 USB 3.0 Header (USB4/USB5 for front access)
JUSBRJ1 Rear USB 3.0 Ports (USB3/4) / IPMI LAN Port
JVGA2 Front VGA Connector
P0-DIMMA1 - P1-DIMMH1 DIMM (memory) Slots (P0 slots: CPU1, P1 slots: CPU2)
PCIe M.2 M.2 Connector
To Next Page
Loading...
