29
Chapter 3: Maintenance and Component Installation
Figure 3-1. Removing the Top Cover
3.2 Accessing the System
The system features a removable top cover, which allows access to the inside of the system.
Removing the Top Cover
1. Press the two release buttons and slide the cover toward the rear.
2. Lift the top cover up.
Check that all ventilation openings on the top cover and the top of the system are clear and
unobstructed.
Caution: Except for short periods of time, do not operate the server without the cover in place.
Release Buttons
Screw
Screw
Service Tag
To Next Page
Loading...
