Supermicro AS -2024S-TR - Button and LED Indicators

58
A+ Server AS -2024S-TR User's Manual
Control Panel


All JF1 wires have been bundled into a single cable to simplify this connection. Make sure
the red wire plugs into pin 1 as marked on the motherboard. The other end connects to the
control panel PCB board.
Figure 4-1. JF1 Header Pins
NMI
X
3.3V Stby
3.3V Stby
3.3V Stby
3.3V Stby
UID LED
3.3V
Reset Button
Power Button
Ground
X
FP PWR LED
HDD LED
NIC1 Activity LED
NIC2 Activity LED
OH/Fan Fail LED
Power Fail LED
Ground
Ground
2 1
20 19
Power Button
The Power Button connection is located on pins 1 and 2 of JF1. Momentarily contacting both
󰀨
     󰀨   

Power Button
Pin Denitions (JF1)
Pin# 
1 Signal
2 Ground
Reset Button
The Reset Button connection is located on pins 3 and 4 of JF1. Attach it to a hardware reset

Reset Button
Pin Denitions (JF1)
Pin# 
3 Reset
4 Ground